Category Archives: Architecture

Multisynth-based Architecture

Traditional clock generators use a simple integer-N phased-locked loop (PLL)-based architecture. The output clock frequency is a function of the input clock frequency and the PLL divider values as shown in the equation
Equation: fOUT = fIN.N/P.R
Traditional single PLL-based IC solutions are suitable for simple integer clock multiplication of reference inputs or clock generation from crystal inputs. However, many applications require clock generation of multiple non-integer-related frequencies (e.g., 125 MHz Ethernet and 106.25llMHz Fibre Channel). Traditional solutions require that the crystal frequency be changed to support each unique frequency plan. This forces the designer to use one or more custom crystals and multiple clock generator ICs to generate the required set of frequencies, increasing the cost, complexity and power consumption of the overall solution.

New Any-Rate Clock Multiplier Architecture Simplifies Design
Recent advances in mixed-signal analog design have made it possible to provide any-rate frequency synthesis from a single device. Silicon Labs newest clock architecture leverages a fractional-N PLL used in concert with a low-jitter fractional divider termed MultiSynth to produce any-rate frequency synthesis on multiple output clocks. The flagship of this new product family is the Si5338 Any-Rate, Any-Output Quad Clock Generator. This technology dramatically simplifies timing architectures by integrating the frequency synthesis capability of four PLLs in a single device, greatly reducing size and power requirements compared to traditional solutions.

MultiSynth Technology
The Si5338s low phase noise, high-frequency VCO supplies a high-frequency output clock to the MultiSynth block on each of the four independent output paths. The first stage of the MultiSynth architecture is a fractional-N divider, which switches seamlessly between the two closest integer divider values to produce the exact output clock frequency with 0 ppm error. To eliminate phase error generated by this process, the MultiSynth calculates the relative phase difference between the clock produced by the fractional-N divider and the desired output clock and dynamically adjusts the phase to match the ideal clock waveform. This novel approach makes it possible to generate any output clock frequency without sacrificing jitter performance. Based on this architecture, each output clock can be individually programmed to generate any frequency from 0.16 to 350 MHz, and select frequencies to 700 MHz. Typical jitter performance enabled by this MultiSynth-based architecture is 1 ps RMS.

Enterprise architecture helps enhance the business strategies

IT industry is the leading sector in the commercial business world. It has many streams to develop the business and to leave the footprints across the globe. They are IT services, hardware implementation, software development, marketing and many more. Software development is the major stream to gain popularity with new innovative technologies and applications. There are numerous platforms and programming languages to develop several software programs and applications to enhance the business. They are Java, HTML, XML, C++, embedded C, Dotnet, visual basics, Siebel, primavera, oracle, SQL and many more. All these platforms are used to design, code and develop multiple applications both for web and desktop purpose.

These days, many organizations are looking for the new innovations to enhance the businesses. Enterprise architecture is the one, which can help organizations enhance the efficiency and flexibility. It helps the business to identify the marketing strategies in several ways to increase the competency and performance. This stream has the ability to translate these marketing insights and needs to common business language of IT strategy to maintain the relationship with the business line executives. It can solve several issues in business to understand the multiple products, platforms, strength and weakness. Generally, it is defined as the process of translating the business strategies into an effective way of enterprise.

These days, many organizations are offering enterprise architecture jobs to enhance their marketing ideas to give an outstanding performance. People, who enter into this field, are designated as enterprise architects. They can assist the organizations to accomplish the business values and to drive the smarter initiatives to improve the performance. Creation, improvement and communication is the key requirement for this architecture that is varied by the principles. It has improved the models with different specifications to describe the evolution. It has a good scope in the IT world with many processes and enterprises to get the benefits.

It has several frameworks such as IAF, EAF, DoDAF and TOGAF. These frameworks are also used to improve the flexibility and growth in the industry. It is the major applications to develop the communication among all kinds of business units to get more industrial needs. In today’s innovative world, many IT companies have implemented this stream to maintain the growth and unit relationship. It is important to manage the several requirements and units in the industry. For that, you have to develop the communication to avoid many hassles. Hence, enterprise architecture is the one to maintain these communication and relationship and improve the performance.

Get more information on: Enterprise Architecture Jobs & IT Service Desk Jobs

Spanish Colonial Revival Style Architecture

Spanish revival architecture is hugely popular in California, and increasingly across the nation. The mission revival style and colonial revival styles grew in popularity at the beginning of the 20th century, but people today still chose to emulate the Spanish style when building their homes and public establishments. Why do people continue to use this Spanish style? I argue that the Spanish colonial style represents the very beginnings of the United States on the west coast, and this time in the US history continues to spark peoples imaginations. The aesthetic elements are iconic, and people still commission architects to create the homes of their dreams in this style.

The Spanish Colonial Revival style was created in the United States in the 20th century, and it was sparked after the opening of the Panama Canal. The novel Ramona also had a great influence on the popularity of this architectural style. The early Spanish colonies of North and South America had their particular style of architecture brought from the homeland, and this style was them updated to accommodate the new century in the US. Between 1915 and 1931 this style was all the rage, and movie stars in Hollywood clamored to get their Hollywood hills homes built in this style. Mostly the single-level detached home saw this style. On a personal note, my own grandmother has one of these homes in California, and its pink!

The Spanish Colonial Revival style is very similar to the Spanish Mission Revival style, but with a few key differences. Its also similar to the pueblo styles of the west and southwest, and influenced as well by the arts and crafts movement that was the foundation of these architectural styles. The iconic use of smooth plaster, stucco walls, and chimney finishes, clay tile roofs, terra cotta and concrete ornaments is still a highly noticeable, recognizable style. Other elements include porches and balconies, and Roman arcades and fountains. Youll also see canvas awnings. The most important Spanish Revival architect in California was George Washington Smith who practiced during 1920s and 1930s. Perhaps his most famous house is the Steedman House in Montecito, CA, now a museum called the Casa del Herrero.

But there are other architects who took this Spanish style across the globe. Take for example a lovely Spanish Revival building in St. Louis, by the architect T.P. Barnett, son of George I. Barnett; another famous architect in St. Louis. The T.P. Barnett building is particularly interesting because it also has Art Deco influences, making it one of the most unique buildings in the Grand Center region of St. Louis. Certainly the next time youre in St. Louis, you need to visit this Spanish Revival building on Washington Avenue.

The Benefits Of Service Oriented Architecture In Software Development

Education is just a area with actually changing impetus. With good invasion of web and on the web services in most walk of present day life, one will need personalized development that’s simple and more user-friendly. With ADF (software development platform) and SOA (service oriented architecture), a strong doorway have been made by a new era of agile programming. Pc software improvement or internet development needs one to be constantly updated with the most recent systems on the market to generally meet client’s dependence on a simple and receptive software.

Extremely high level licensed programs can quickly be present in famous organizations to supply also corporate Hadoop training, ADF training, SOA training, and intense Hadoop training. Practical implementations of those systems possess a good method for any entrepreneur in addition to for the info technology world. Let’s comprehend both facades individually.

From THIS notion

PC software builders think it is excessively versatile and easy to program elements that may be recycled and designed without worrying all about the implementation program language and system.

Platform autonomy: SOA seeks to supply a nimble software that’s free from any program language worry or host system.

Architectural freedom: Technologies like SOA and ADF enables a scalable and flexible system to create composite development easier and recyclable.

High utility: Such systems gather several resources together that work with client’s fulfillment and easiness. For instance, it enables managing to Emails, charge cards and charging from the simple system.

From company notion

Similar to the quick changes in internet sites, the fundamental business methods are also changed to be secure, significantly quick, and significant. Entrepreneurs require a simple program for numerous procedures. ADF and soa systems have made their lives simple to use application and easier with modern programs.

Reusable components: Each element is individually made to be recycled for quantity of programs. Data freedom: Enormous information from disparate platforms is saved within an structured manner to be refined according to necessity. Performance control: Due to various elements and structure independent data, monitoring the company efficiency becomes simple by climbing different variables like revenue, manufacturing, structure an such like. Agility: The fundamental structure becomes quite durable and nimble for any new function or service; only a element needs to be included instead of altering the entire application or software. Economical: Being system separate, it enables managing every function from the simple centre, ergo decreasing the price to engage in to man power and more equipment.

Enjoy the Architecture of Guru Ka Tal during Your Agra Tour

Agra, which is located on the banks of the holy Yamuna River in the state of Uttar Pradesh, is world-famous for the majestic Taj Mahal. The city served as a prominent seat of the Mughal Empire for a long period and was the capital of Hindustan during that time. It lies at a distance of about 200 km from the national capital – New Delhi and easily accessible by road, rail and air transport from different parts of the country. The city has an extreme climate in winters and summers, with moderate temperatures in the rest seasons. October to March is considered as the ideal time to visit this historical city. If you wish to witness the grandeur of Taj Mahal and other prominent attractions of this place, such as Agra Fort, Jama Masjid, Moti Masjid, Fatehpur Sikri and Guru Ka Tal, then go for an Agra tour that can be availed from various travel agencies and travel portals.

Guru Ka Tal – History and Architecture

Originally, this reservoir was constructed in the year 1610, during the reign of Emperor Jahangir beside the tomb of Itibar Khan Khwajasara, to collect and preserve rainwater. The walls and embankments of this water reservoir have been made of rubble masonry and brick. It has a square design, with a long and wide ramp paved with stone slabs (khurra) and upright bricks, and stepped ghat. The walls of this structure feature four double-storied towers having an octagonal design. The top storey of these towers boasts of Mughal architecture, with an octagonal spire with brackets and pillars. The material that was used for constructing the ghat was red sandstone while the spire had been decorated with dazzling tiles. Constructed on a four feet high platform, this reservoir features four chhatris on its four corners with 16 pillars, with carved brackets and capitals. The corner domes of this place have a spherical design while the one on the sides have an oblong design.

At the time it was built, this reservoir had 12 towers, but today only eight can be seen. It had effective inlets of northern and western parts of the tank; a canal used for channelling excessive water in to the river and a dam on its south-eastern side. The water collected in this reservoir was used during dry seasons for irrigation. The terrace on the top floor is accessible through a wide red sandstone stairway, located on the southern side.

If you wish to witness Taj Mahal and other important attractions of Agra, then choose for those tour packages that include trips to all these important places. As this city offers a lot of see and to do, it gives the ideal opportunity to experience the best of India holidays.

Know About Iranian Architecture

Iranian architecture displays a class and elegance that cannot be matched with any other style of architecture and design. It is quite distinct from that of Muslim countries. The major features of Iranian architecture are: structural ingenuity basically in vault and dome construction; a skill of decoration with freedom and intricacy incomparable to any other form of architecture.

The pre-Islamic buildings include the remarkable Elamite ziggurat at Chogha Zanbil. Baked brick was used for outer surfaces by the 12th century BC. Most of the greatest buildings were built with a religious purpose, and even in secular buildings religious influences are entirely absent. Palaces were present, and their shapes, sizes and colors varied according to the ruling dynasty.

The first great development of ancient Persian architecture took place under the Achaemenid dynasty during the Persian Empire, from about 550 to 330 BC. There are numerous remains of Achaemenian period, including two palaces, a sacred precinct, a citadel, a tower, and the tomb of Cyrus.

Royal architecture under the Achaemenid also included tombs cut in solid rock, of which the best-known examples are those at Naqshah Rostam near Persepolis. Little is known of the popular building practices of the period, but archaeologists believe that the ordinary dwelling was made of mud brick. After the conquest of Persia by Alexander the Great, Greek influence, in its late, Hellenistic phase, was predominant in the arts of Persia. Examples include fragments of bronze sculpture found at Shami, and the Parthian sculptural reliefs at Behistun.

During the Islamic period “mosques” became the major buildings in Iranian architecture. Outstanding examples of early Islamic Iranian architecture include the Mosque of Baghdad built in 764, the Great Mosque at Samarra erected in 847, and the early 10th-century mosque at Nayin.

After the 17th century, Iranian artists copied European paintings and engravings, and the native traditions declined. But Iranian architecture still managed to leave a huge impact on the world.

Meenakshi Temple Madurai The Best Of Dravidian Architecture

Meenakshi Sundareswarar Temple or Meenakshi Amman Temple is a historic Hindu temple which is located in the city of Madurai in Tamil Nadu. This is among the most famous temples of India which is known throughout the world for its outstanding and impressive architectural beauty. In Hindu religion temple is the place which is reserved for spiritual and religious activities that include prayers and analogous rites.
Sri Meenakshi temple of Madurai is dedicated to Lord Shiva and his consort Goddess Meenakshi (Parvati). Goddess Meenakshi is an incarnation of the Goddess Parvati who is worshiped mainly by South Indians. The utmost architectural wonder of this templeis a testimony to the affluent Dravidian Culture. Some of the prominent features of this colossal temple are:

Temple Architecture:
This temple was built by Kulasekara Pandyan around 2000 years ago. The colossal structure of this temple is among the finest preserved monuments of the Dravidian style of temple architecture. Architectural and sculptural magnificence is the aspect of this temple which makes it popular throughout the world. The temple premise is surrounded by elevated wall which is adorned with various paintings and sculptures. The main deities of this temple are Lord Sundareswarar and Goddess Meenakshi, whose sanctums are encircled by number of smaller shrines and majestic pillared halls. Among the several magnificent structures the most striking ones are the 12 gopurams which are known for their bright colors painting and decoration of stucco figures of deities, animals, monsters, demigods, and celestial nymph.

Ashta Shakthi Mandapam:
This is located at the eastern entrance of the temple which is known for its 1,008 lamp holders. During festive occasions these lamps are lighted which gives spectacular sight to this place. Pillars of this structure are known for their carvings which depict the stories related to Meenakshi’s birth and LordShiva’s Thiruvilayadals (miracles). These pillars are carved on various mythological themes which mesmerizes visitors.

Meenakshi Nayakkar Mandapam:
It is situated adjacent to the Astha Shakthi Mandapam which is known for its 110 pillars. These pillars are famous for their beautiful carvings based on various religious and non-religious themes. A figure of animal with a lions body and an elephants head called Yalli is extremely beautiful.

Porthamarai Kulam (Golden Lotus Tank): >
This is the sacred lake situated inside the temple premises, in which devotees take bath. According to the Indian mythology it is believed that Indra bathed in this tank to wash away his sin, and then worshiped Lord Shiva with golden lotus flowers from the tank. It is surrounded by the corridor which is known for its beautiful sculptures based on various religious themes. The pillars on the northern side of this corridor are decorated with 24 poets of the Third Tamil Sangam.

Some of the other well known attractions of grand Dravidian style edifice are Oonjal Mandapam, Swami Sundareswarar Shrine, Kalyana Mandapam, Aayiram Kaal Mandapam or Thousand Pillar Hall and many more.

Importance of AutoCAD in the field of engineering and architecture

Computer has recently entered in every field known to any man and it gives great results when it was used. In the field of architecture and engineering, the need for the computer has become a necessity now a days there is no such work possible, which is made without using a computer. As technology has improved recently, so the choice of technical tools and specific software, which are used in these areas. And for this reason that the CAD or computer aided design and its improved version of the CADD or computer aided design and projects have emerged from behind the scenes to bring a sigh of relief for those who find that it is very hectic and time to sit down and design images of a building and the project plan for the purpose of engineering.

The AutoCAD or computer aided design machine has been a great help to engineers and also for several architectures that are finding it impossible to deal with drawings and plans of the project engineering work and the bring on the verge of perfection. The AutoCAD in these cases helped to design the architectural perfection before designing the actual architecture involved in the project. The AutoCAD has a very user friendly interface and its programming by the end had been done with the help of the famous C + + compiler. It operates in accordance with several other programs such as LISP, Auto LISP, VBA,. NET etc. and this may be one of the suits and tools used by engineers to simplify their work perfect.

Autocad or commonly known as computer aided design is a software application for writing and design 2D and 3D. He came on stage during the month of December nineteen hundred and eighty two. Autocad pioneered programs / DAC held on personal computers, particularly IBM personal computer. Meanwhile, the programs of most other CAD used to run on minicomputers or mainframes that were connected to the terminal graph of each user’s computer. vertical products Autocad and Autocad are incompatible for the type of BitDefender software security.

Appended below are the guidelines for free download for AutoCAD and AutoCAD relevant information about the free download. What we have to do is download the autocad trial for 30 days and learn about the design in 2D and 3D design and documentation platforms. One will have the opportunity of receiving the current version of CAD software with free download autocad. It can shape and design the world around him with the help of powerful and flexible features of AutoCAD design software and documentation, with the help of 2D and 3D worlds leading CAD tools.

Latest Information about Autocad

Andolasoft Java J2EE Application Development using MVC Architecture is a Great Option

Java is the class based object oriented programming language which is complex in nature. This complexity requires huge experience and high level skill to develop quality applications which facilitate the java developers to build secure and scalable applications in fast pace. Andolasoft has vast experience in providing Java application development services to its customers spread over the world in different Java technologies like J2EE framework, J2ME, Java Server Pages (JSP), with advanced tools and techniques. We have skilled Java/J2EE development team who have enormous experience working on wide range of business requirement and formulate the best solution for your business. They believe java is the best option for developing secure, flexible and scalable database driven applications and java reduces the coding and the same code can be reused in different platforms. MVC architecture is the Model-View-Controller separate the business logic and application data from the presentation data to the user. It divides an application into three parts: the model, the view and the controller and applied in the graphical user interaction model like input, processing and output. The objective of MVC architecture is to separate application data and business logic from presentation data. In working condition the model class represents the data to the application. Model classes know what the data is, how to create it, how to delete it, how to store it and how to retrieve it. Controller provides the logic of the application and MVC tells how to design software. Andolasoft Java developers are continuously working with MVC architecture from last couple of years. They have successfully deployed robust and highly flexible applications which are highly secure and scalable. Here are our Java development services: Designing and development of web/desktop applications Existing applications enhancement Application Integration Database design and administration Application migration to Java/J2EE platform Quality Testing We are one of the leading custom software development company, not only expertise in java application development but also we have deployed many applications in different platforms like RoR, CakePHP, Android and etc. To know more about our services and applications please visits our project portfolio. If you are interested to hire us the please feel free to call us at 408-625-7188 or email at . .

World Architecture Festival 2013 – a report

By Team IAnD Photography: Courtesy WAF’13

October 2 -4 2013 saw three busy days of ideation, discussion and critiques on global architecture and design at the World Architecture Festival held at Moshe Safdie designed Marina Bay Sands, Singapore – a venue as awe inspiring as the projects that unfolded within its festive panorama-

The World Architecture Festival opened to enormous numbers (reportedly the biggest yet) with the theme of 2013 bring -Value and values’, -to examine the relationship between perceptions of financial value and the values that architects typically hold about their work.-

Director of WAF’13, Paul Finch commenting on the sheer quality and diversity of the projects entered into the festival, and shortlisted for the final round of awards, said that the array of projects demonstrated the increasingly global nature of the event.

Among various stalwarts from various quarters of the world, Mumbai’s Ar. Sanjay Puri’s corporate project in Jaipur -72 Screens’, was also shortlisted for the awards.

A vibrant, thought-provoking three-day session of presentations of various projects by the architects, seminars and talks on diverse issues that touch and plague the building industry were discussed and debated. Noted international speakers, project critiques and appreciations apart, everyone waited with baited breath as the ultimate honour – the winner of the World Building of the Year 2013 award was announced and granted to the Aukland Art Gallery Toi o Tamaki in New Zealand by Frances-Jones Morehen Thorp and Archimedia.

The four main award winners including World Building of the Year Award were Botanical Garden Australia designed by landscape studio Taylor Cullity Lethlean and plant expert Paul Thompson for Landscape of the Year; National Maritime Museum of China designed by Cox Rayner Architects for Future Project of the Year; and Barcelona Apartment by David Kohn Architects for World Interior of the Year.

As part of INSIDE: World Festival of Interiors, an event held in conjunction with the WAF’13 with a concentration on interior projects, shortlisted 59 outstanding interior projects across the 12 award categories, Bars and Restaurants, Creative Re-use, Culture, Display, Education, Health, Hotels, Offices, Residential, Shopping Centres, Shops, and Transport. For the complete list of awardees, do check out:

to view images click on globalhop.indiaartndesign.com